Hiển thị các bài đăng có nhãn CNC-Calc Software v7. Hiển thị tất cả bài đăng
Hiển thị các bài đăng có nhãn CNC-Calc Software v7. Hiển thị tất cả bài đăng

Thứ Năm, 11 tháng 8, 2022

Editing Commands (Modify) in CNC-Calc Software v7 - Blog yêu cơ khí - yck2020

Editing Commands (Modify) in CNC-Calc Software v7

To design with Cimco Edit V7 Software, one needs to understand the functionality of the Design Tools.

We guide you to use the Modify Tool in the “CNC-Calc Tab”. The content of this article is done with CNC-Calc v7 Software.

You can find this article again with keywords:

We start Editing Commands (Modify) in CNC-Calc Software v7.

This  section  describes  the  functions  in  the  Modify  menu.  These  functions  are  used  to modify the drawing geometry in different ways.

Modify  menu

In the Modify command group, there are 15 functions to help us design effectively with CNC-Calc Software v7, including: Trim To Intersection, Trim One Element, Trim Two, Elements, Fillet Elements, Chamfer Elements, Break Element, Join Elements, Delete, Remove Duplicates, Offset Elements, Mirror Elements, Translate Elements, Rotate Elements, Scale Elements, Undo.

How to use the Modify command in CNC-Calc Software v7?

  • Trim To Intersection

Use this option to trim the selected element to the nearest intersection(s).

Select the element to be trimmed on that part to be removed. It is then trimmed to 

the intersection(s) nearest to the point where it was selected. The trimmed element 

is also broken in two if there are intersections on both sides of the selected point.



  • Trim One Element

Use this option to trim one element to another.

Select the element to be trimmed first, on the section to be kept, and then select 

the element to trim to. This kind of trimming may extend the trimmed element to 

the intersection with the element it is trimmed to.


  • Trim Two Elements

Use this option to trim two elements to each other.

Select the two elements to be trimmed, on the sections to be kept. This kind of 

trimming may extend the trimmed elements to their intersection


  • Fillet Elements

Use  this  option  to  create  a  fillet  between  two  elements,  with  a  fillet  radius  you 

select.

It is optional whether the two elements should also be trimmed to the fillet.


  • Chamfer Elements

Use this option to create a chamfer between two elements, with a defined angle 

and/or distance.

It is optional whether the two elements should also be trimmed to the chamfer.


  • Break Element

Break element will divide an element into two pieces.

First select the element to be broken into two, and then select the point at which it 

should be divided.


  • Join Elements

Use this option to join two selected elements into one.

  • Delete

Use this option to delete the elements you select. They can be restored with the 

Undo function (the Undo icon in the Modify toolbar).


  • Remove Duplicates

Select this option to remove duplicate elements in the drawing.

  • Offset Elements

Use this option to offset the elements you select by a specified distance.

Whether the original element is kept or not is your choice.

  • Mirror Elements

Use this option to perform a mirror operation of the elements you select along a 

line selected as the mirror axis.

It is optional whether the original element should be kept.


  • Translate Elements

Use  this  option  to  translate  the  elements  you  select  along  a  vector  defined  by 

selecting two points.

It  is  optional  whether  the  original  should  be  kept,  and  it  is  possible  to  create 

multiple copies, where each copy is translated one step further along the selected 

vector.


  • Rotate Elements

Use  this  option  to  rotate  elements.  This  will  create  one  or  more  copies  of  the 

selected elements, rotated around a selected point, at a specified angle per copy.

It is optional whether the original element should be kept


  • Scale Elements

Use this option to create one or more copies of the selected elements, scaled about 

a selected point by a specified scale factor.

It is optional whether the original element should be kept.

  • Undo

Select  this  option  to  undo  one  or  more  operations.  This  can  mean  deleting 

elements  created,  restoring  deleted  elements,  and/or  undoing  modifications  to 

elements. Undo can also be accessed with Ctrl+Backspace


To exploit the functions of the Modify command well in CNC-Calc Software v7, we need to know more about the related command groups:

  • Snap;

  • Points and Lines;

  • Arcs and Circles;

  • Pattern;

  • Text.

How to use the Snap command in CNC-Calc Software v7 of Cimco A/S

How to use the Points and Lines in CNC-Calc Software v7 of Cimco A/S

How to use the Arcs and Circles in CNC-Calc Software v7 of Cimco A/S

How to use the Pattern in CNC-Calc Software v7 of Cimco A/S

How to use the Text command in CNC-Calc Software v7 of Cimco A/S

Hopefully, the article Editing Commands (Modify) will help you better understand CNC-Calc Software v7. If you have any discussion with us, please comment in the comment section at the end of the article. Good luck!

Bạn có trao đổi gì về nội dung này không? Hãy để lại Comment trong phần Nhận xét cuối bài đăng nhé. Bài viết này thuộc chủ đề  công bố trên Blog Yêu Cơ Khí #YCK2020 - Kênh chia sẻ kiến thức về Công nghệ Chế tạo máy.

 Bạn muốn tìm kiếm gì không?

Top All

Nguồn video của Blog Yêu Cơ khí YCK2020

Về chúng tôi

Về chúng tôi
Blog Yêu Cơ khí